SABIC PP-UMS 561P (former HEX17112) is an unique new Ultra Melt Strength resin in the market, with a melt strength of more than 65 cN and outstanding foam-ability. It can be used by all industry segments as a building block to develop new foaming solutions that enable an unprecedented level of light weighting.
| Original Document | Technical Datasheet(English) PP-UMS PRODUCT BROCHURE(English) PP-UMS PRODUCT BROCHURE(Chinese) | |||
| Solutions | Foam Food TrayFoam & LightweightShoes/Footwear | |||
| Features | FoamableLow EmissionLow FoggingHigh melt strength | |||
| Processing | ExtrusionFoamFoam Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-2/1A | 1 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-2/1A | 50 mm/min |
Melt Strengh | *** cN | Internal | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** kJ/m² | ISO 180/1A | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2/B | Flat wise ( testbar 80*10*4mm) |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
