HYDEX® 4101 UD Blue - Stock Shapes (rods, plates, tubes)
Main features
-resistent to cleaning agents; food grade blue; good chemical resistance; good dimensional stability; good impact strength; metal detectable; x-ray opaque
Target Industries
-food technology; food processing; food engineering; conveyor technology; packaging and paper machinery
| Original Document | Technical Datasheet(English) | |||
| Features | Good Impact ResistanceMetal DetectableFood ContactChemical ResistanceDetergent resistant | |||
| Additive | Detectable Filler | |||
| Appearance | SheetRodpipeBlue | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Moisture /Humidity Absorption | *** % | ASTM D 570 | 24 hrs, 23°C |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** psi | ASTM D638 | 23°C |
Tensile Strength | |||
- | *** psi | ASTM D 638 | 23°C |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 23°C |
Flexural Modulus | *** psi | ASTM D790 | 23°C |
Flexural Strength | |||
- | *** psi | ASTM D790 | 23°C |
Compressive Strength | *** psi | ASTM D 695 | 23°C, 1% strain |
Compressive Strength | *** psi | ASTM D 695 | 23°C, 10% strain |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** ft·lb/in | ASTM D256 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Rockwell M | *** M | ASTM D 785 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °F | ASTM D648 | |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °F | ASTM D648 | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-4/°F | ASTM D 696 | |
Melt Temperature(Tm) | *** °F | Internal | |
Continuous Use Temperature | |||
Long term | *** °F | Internal | Long Term |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
