Main features
- high thermal conductivity
-very good electrical insulation
Target Industries
-electrical engineering
-LED lighting technology
-mechanical engineering
-automotive industry
| Original Document | Technical Datasheet(English) | |||
| Features | Thermal ConductiveInsulatingFilled & Reinforced | |||
| Appearance | Gray Color | |||
| Processing | Injection | |||
| Reinforced | Mineral | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Melt Mass Flow Rate(MFR) | |||
280°C/5.0 kg | *** g/10 min | ISO 1133 | |
Mold Shrinkage | |||
Flow | *** % | ISO 294-4 | |
Across Flow | *** % | ISO 294-4 | |
Bulk(Apparent ) Density | *** g/cm³ | ISO 60 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1 | 50 mm/min |
Tensile Strength | |||
- | *** Mpa | ISO 527-1 | 50 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-1 | 50 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Unnotched Impact Strengh | |||
- | *** kJ/m² | ISO 179/1eU | 7,5 J |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | DIN 53765 | |
Glass Transition Temperature | *** °C | DIN 53765 | |
Thermal Conductivity | *** W/(m K) | DIN EN 821 | in-plane |
Thermal Conductivity | *** W/(m K) | DIN EN 821 | through-plane |
Continuous Use Temperature | |||
Long term | *** °C | Internal | long term |
Temperature at Short Circle Operation | *** °C | Internal | |
Processing Temperature | ***~*** °C | - | |
Mould temperature | ***~*** °C | - | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-m | IEC 61340-2-3 | |
Surface Resistivity | *** Ohm | IEC 61340-2-3 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
