| Original Document | Technical Datasheet(English) | |||
| Additive | Heat Stabilizer | |||
| Appearance | Black | |||
| Processing | Injection | |||
| Reinforced | 35% Glass Fiber10% Carbon Fiber45% Glass Fiber+Carbon Fiber | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Viscosity | *** cm³/g | ISO 307 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527-1 | 50 mm/min |
Tensile Strength | |||
- | *** Mpa | ISO 527-1 | 50 mm/min |
Tensile Elongation | |||
Break | *** % | ISO 527-1 | 50 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Charpy Unnotched Impact Strengh | |||
- | *** kJ/m² | ISO 179/1eU | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | |
Glass Transition Temperature | *** °C | DIN 53765 | dry |
Glass Transition Temperature | *** °C | DIN 53765 | moist |
Continuous Use Temperature | |||
Long term | *** °C | Internal | long term |
Temperature at Short Circle Operation | *** °C | Internal | |
Processing Temperature | ***~*** °C | - | |
Mould temperature | ***~*** °C | - | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Specific electrical conductivity | *** S/m | ISO 3915 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
