High Density Polyethylene for Pipe Non-Pressure Pipe Extrusion Applications
Formolene® HP4000 is a high performance copolymer that is designed for the most demanding requirements of nonpressure pipe applications. It has good long-term hoop strength performance, very high melt strength, and outstanding toughness even at low temperatures.
Formolene® HP4000 meets all requirements of ASTM D4976 – PE 235
Formolene® HP4000 meets the requirements of ASTM F 2160 and UL651A for use in solid wall HDPE conduit pipe.
Suggested Applications:
Telecommunications Conduit
Non-Pressure Pipe Applications
| Original Document | Technical Datasheet(English) | |||
| Processing | Tube Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | Condition A, B, C (100% Igepal), F50 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 50 mm/per min. |
Break | *** Mpa | ASTM D638 | 50 mm/per min. |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 50 mm/per min. |
Flexural Modulus | *** Mpa | ASTM D790 | |
Flexural Modulus | *** Mpa | ASTM D3350 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
