High Density Polyethylene (HDPE) Resin Designed for High ESCR Blow Molding Applications
Formolene® HB4903 is a high performance copolymer that is designed for the most demanding blow molding applications. It is also utilized in many sheeting applications. This resin has exceptional stress crack resistance, excellent surface appearance, good melt strength, and good processability.
Formolene® HB4903 meets all the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520 for food packaging at temperatures not exceeding 212F (100C).
Suggested Applications:
Fuel Tanks, Garbage Cans, Seating, Large Industrial Containers, Sheet
| Original Document | Technical Datasheet(English) | |||
| Features | Good SurfaceEasy processingFood ContactESCRHigh melt strength | |||
| Processing | Sheet ExtrusionBlow Molding | |||
| Compliance | FDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 100% Igepal, F50 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 50 mm/min |
Tensile Elongation | |||
Break | *** % | ASTM D638 | 50 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
