8001BL is an ethylene/butene copolymer based High Density Polyethylene which is designed for the extrusion of various pressure pipes.The Taisox HDPE is produced by the CSTR slurry process.
According to ISO 12162:2009(E), the black 8001BL is classified PE 100 at 20℃ and 50 years exceeds a MRS of 10Mpa. It provides good creep resistance, excellent ESCR, and high mechanical properties.
8001BL is recommended in the applications of potable water pipe, gas pipe, sewer & drain pipe, telecommunication system, industrial pipe, circular cages etc .
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Appearance | Black | |||
| Processing | Tube Extrusion | |||
| Reinforced | 2.3% Carbon black | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
190℃/5 kg | *** g/10 min | ASTM D 1238 | |
190℃/21.6 kg | *** g/10 min | ASTM D 1238 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** kg/cm² | ASTM D638 | |
Break | *** kg/cm² | ASTM D638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Melt Temperature(Tm) | *** °C | Internal | DSC |
Processing Temperature | ***~*** °C | - | |
Thermal Stability | *** °C | ISO/TR 10837 | 30 min. |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Minimum Required Strength(MRS) | *** MPa | ISO 9080 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
