Vistamaxx 6202FL is primarily composed of isotactic propylene repeat units with random ethylene distribution, and is produced using ExxonMobil's proprietary metallocene catalyst technology. The 'FL' designates this product passes ExxonMobil's test for film appearance with regard to gels, as needed for performance film applications ('A' rating).
Key Features
• Suitable for a wide range of cast film, extrusion coating, extrusion lamination and injection molding applications.
• Very good elasticity, flexibility and toughness.
• Excellent adhesion to conventional or metallocene PP and PE, and to various polyolefinic substrates (film, woven and nonwoven).
• Very low seal initiation temperature combined with high seal strength when used as an extrusion coating or laminating layer.
• High peel forces when used as adhesive layer of co-extruded surface protection films and masking tapes.
• Very effective at increasing the coefficient of friction of PE or PP blends.
• Good chemical resistance to aqueous systems and non-hydrocarbon based fluids.
• May be used in food contact applications (see FDA and EU notes).
• RoHS compliant.
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Appearance | Pellets/Granules | |||
| Processing | CalenderingCast FilmInjectionExtrusionSheet ExtrusionExtrusion CoatingCompounding | |||
| Compliance | RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
230°C/2.16 kg | *** g/10min | Internal | |
Ethylene Content | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | Internal | |
at 100% strain | *** Mpa | Internal | |
at 300% strain | *** Mpa | Internal | |
Tensile Elongation | |||
Break | *** % | Internal | |
Flexural Modulus | *** Mpa | Internal | 1% Secant |
Tear Strength | *** kN/m | Internal | Die C |
Tensile Set | *** % | Internal | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | Internal | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
