Vistamaxx 3020FL is primarily composed of isotactic propylene repeat units with random ethylene distribution. It is produced using ExxonMobil's proprietary metallocene catalyst technology. The 'FL' designates this product passes ExxonMobil's test for film appearance with regard to gels, as needed for performance film applications ('A' rating).
Key Features
• Suitable for a wide range of blown film and thermoforming applications where improved melt strength is desired.
• Can be blended with PP, PE and other polyolefins.
• Excellent toughness in terms of tear and puncture resistance with good processability for stretch hood cores.
• Good optical and sealing properties.
• Good organoleptic properties and may be used in food contact applications (see FDA and EU notes).
• Good chemical resistance to aqueous systems and non-hydrocarbon based fluids.
• RoHS compliant.
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Good optical propertiesEasy processingFood ContactChemical ResistanceHigh melt strength | |||
| Appearance | Pellets/Granules | |||
| Processing | Blown FilmThermoformingCompounding | |||
| Compliance | RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
230°C/2.16 kg | *** g/10min | Internal | |
Ethylene Content | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | Internal | |
Break | *** Mpa | Internal | |
at 100% strain | *** Mpa | Internal | |
at 300% strain | *** Mpa | Internal | |
Tensile Elongation | |||
Yield | *** % | Internal | |
Break | *** % | Internal | |
Flexural Modulus | *** Mpa | Internal | 1% Secant |
Tear Strength | *** kN/m | Internal | |
Tensile Set | *** % | Internal | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | Internal | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
