Vistamaxx 3000 is primarily composed of isotactic propylene repeat units with random ethylene distribution, and is produced using ExxonMobil's proprietary metallocene catalyst technology. It has moderate elastomeric properties, is easy to process and is compatible with a wide variety of hydrocarbon based polymers. It is available as free flowing pellets.
Key Features
• Suitable for a wide range of film, sheeting and compounding applications requiring good durability and mechanical properties. • Excellent adhesion to conventional or metallocene PP and PE.
• Very good elasticity, toughness and clarity.
• Very low seal initiation temperature combined with high seal strength when used as sealing layer of co-extruded structures.
• Very good chemical resistance and long term aging.
• RoHS compliant.
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | DurabilityGood AdhesionGood Heat SealChemical Resistance | |||
| Appearance | Pellets/GranulesClear/Transparent | |||
| Processing | InjectionExtrusionSheet ExtrusionBlown FilmCompounding | |||
| Compliance | RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
230°C/2.16 kg | *** g/10min | Internal | |
Ethylene Content | *** % | Internal | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | Internal | |
Break | *** Mpa | Internal | |
at 100% strain | *** Mpa | Internal | |
at 300% strain | *** Mpa | Internal | |
Tensile Elongation | |||
Yield | *** % | Internal | |
Break | *** % | Internal | |
Flexural Modulus | *** Mpa | Internal | 1% Secant |
Tear Strength | *** kN/m | Internal | |
Tensile Set | *** % | Internal | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | Internal | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | Internal |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
