A soft, black, specialty, non-hygroscopic thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. It is especially formulated to bond to ABS, PS, PC, PMMA, ASA, PET and PPO/PS blends for applications where hard/soft combinations are required. This grade of Santoprene TPV is shear-dependent and can be processed on conventional thermoplastics equipment for injection molding or extrusion. It is polyolefin based and recyclable within the manufacturing stream.
Key Features
• UL Listed #QMFZ2.E80017 Plastics Components, #QMFZ8.E80017 Plastics Certified for Canada - Components.
• Designed for excellent adhesion onto ABS, PS, PC, PMMA and ASA (cold insert or 2K [two-shot] molding).
• Recommended for applications requiring superior part surface appearance
• Designed for soft touch applications.
• Adhesion values can vary according to type of ABS, PS, PC, PMMA, ASA or blends thereof, tool design and processing conditions.
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Good SurfaceGood AdhesionSoft | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | InjectionCo-extrusion | |||
| Compliance | RoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | Across Flow, 23°C |
Break | *** % | ISO 37 | Across Flow, 23°C |
Compression Set | *** % | ASTM D 395 | 125°C, 70 hr, Type 1 |
Compression Set | *** % | ISO 815 | 125°C, 70 hr, Type A |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 868 | 15 sec, 23°C |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
HB | *** mm | UL94 | |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Hardness(Heat Aging) | *** - | ISO 188 | Change in Air, 100°C, 168 hr |
Hardness(Heat Aging) | *** - | ISO 188 | Change in Air, 125°C, 168 hr |
Hardness(Heat Aging) | *** - | ASTM D573 | Change in Air, 100°C, 168 hr |
Hardness(Heat Aging) | *** - | ASTM D573 | Change in Air, 125°C, 168 hr |
Tensile Strength(Heat Aging) | *** % | ISO 188 | Change in Air, 100°C, 168 hr |
Tensile Strength(Heat Aging) | *** % | ISO 188 | Change in Air, 125°C, 168 hr |
Tensile Strength(Heat Aging) | *** % | ASTM D573 | Change in Air, 100°C, 168 hr |
Tensile Strength(Heat Aging) | *** % | ASTM D573 | Change in Air, 125°C, 168 hr |
Elonggation(Heat Aging) | *** % | ISO 188 | Change in Air, 100°C, 168 hr |
Elonggation(Heat Aging) | *** % | ISO 188 | Change in Air, 125°C, 168 hr |
Elonggation(Heat Aging) | *** % | ASTM D573 | Change in Air, 100°C, 168 hr |
Elonggation(Heat Aging) | *** % | ASTM D573 | Change in Air, 125°C, 168 hr |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
