A soft, black, UV resistant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide range of applications. This grade of Santoprene TPV is shear-dependent and can be processed on conventional thermoplastics equipment for injection molding, extrusion, blow molding, thermoforming or vacuum forming. It is polyolefin based and recyclable within the manufacturing stream.
Key Features
• UL listed: file #QMFZ2.E80017, Plastics - Component; file #QMFZ8.E80017, Plastics Certified For Canada - Component.
• Recommended for applications requiring excellent flex fatigue resistance.
• Excellent ozone resistance.
• Designed for improved UV resistance.
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Fatigue ResistantUV StabiltiyOzone ResistantSoft | |||
| Appearance | Pellets/GranulesBlack | |||
| Processing | InjectionExtrusionSheet ExtrusionProfile ExtrusionBlow MoldingInjection Blow MoldingExtrusion Blow MoldingVacuum FormingCo-extrusion | |||
| Compliance | RoHSUL QMFZ2 | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | |
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Outdoor Suitability UL F1/F2 | |||
F1 | *** - | UL 746C | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D 412 | Across Flow, 23°C |
Break | *** Mpa | ISO 37 | Across Flow, 23°C |
at 100% strain | *** Mpa | ASTM D 412 | Across Flow, 23°C |
at 100% strain | *** Mpa | ISO 37 | Across Flow, 23°C |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | Across Flow, 23°C |
Break | *** % | ISO 37 | Across Flow, 23°C |
Compression Set | *** % | ASTM D 395 | 125°C, 70 hr, Type 1 |
Compression Set | *** % | ASTM D 395 | 70°C, 22 hr, Type 1 |
Compression Set | *** % | ISO 815 | 125°C, 70 hr, Type A |
Compression Set | *** % | ISO 815 | 70°C, 22 hr, Type A |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
Brittleness Temperature | *** °C | ISO 812 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ISO 868 | 15 sec, 23°C |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Relative Temperature Index(RTI), Elec | |||
- | *** °C | UL 746 | |
Relative Temperature Index(RTI), Str | |||
1.0mm | *** °C | UL 746 | |
1.5/1.6 mm | *** °C | UL 746 | |
3.0/3.2 mm | *** °C | UL 746 | |
Continuous Use Temperature | |||
Long term | *** °C | SAE J2236 | 1008 hr |
| Flammability | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Flame Rating | |||
HB | *** mm | UL94 | |
HB | *** mm | UL94 | |
HB | *** mm | UL94 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Dielectric Constant(Permittivity) | |||
- | *** - | IEC 60250 | 23°C, 1.98 mm |
- | *** - | ASTM D150 | 23°C, 1.98 mm |
Comparative Tracking Index (CTI) | |||
- | PLC | UL 746 | |
Dielectric Strength | *** kV/mm | ASTM D149 | 23°C, 2.00 mm |
High Voltage Arc Tracking Rate(HVTR) | *** PLC | UL 746 | |
Hot Wire Ignition(HWI) | *** PLC | UL 746 | 1.0 mm |
Hot Wire Ignition(HWI) | *** PLC | UL 746 | 1.5 mm |
Hot Wire Ignition(HWI) | *** PLC | UL 746 | 3.0 mm |
High Ampere Arc Ignition(HAI) | PLC | UL 746 | |
High Voltage Arc Resistance to Ignition(HVAR) | *** PLC | UL 746 | |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Hardness(Heat Aging) | *** - | ISO 188 | Change in Air, 135°C, 1008 hr |
Hardness(Heat Aging) | *** - | ASTM D573 | Change in Air, 135°C, 1008 hr |
Tensile Strength(Heat Aging) | *** % | ISO 188 | Change in Air, 135°C, 1008 hr |
Tensile Strength(Heat Aging) | *** % | ASTM D573 | Change in Air, 135°C, 1008 hr |
Elonggation(Heat Aging) | *** % | ISO 188 | Change in Air, 135°C, 1008 hr |
Elonggation(Heat Aging) | *** % | ASTM D573 | Change in Air, 135°C, 1008 hr |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
