Paxon™ 7000 series of crosslinkable mHDPE resins are designed to offer outstanding ESCR, toughness, thermal, impact and notch failure resistance. These resins are ideally suited for applications that require excellent part fill during processing and outstanding finished part performance. Paxon™ 7000 series grades are all supplied with long term UV stabilization.
AddPacks:
Paxon™ 7003 (Natural) - Pellet
Paxon™ 7004 (Natural) - 20 and 35 US Mesh
Powders Paxon™ 7203 (Black) - Pellet
Paxon™ 7204 (Black) - 20 and 35 US Mesh Powders
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | Good Impact ResistanceHeat ResistanceUV StabiltiyESCRCrosslinkable | |||
| Appearance | PowderNatural Color | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 10% Igepal, F0 |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 100% Igepal, F0 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 50 mm/min |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 50 mm/min |
Break | *** % | Internal | |
Flexural Modulus | *** Mpa | ASTM D790 | 1% Secant |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Falling Dart Impact | *** J | Internal | -40°C, 3.18 mm |
Falling Dart Impact | *** J | Internal | -40°C, 6.35 mm |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
1.8 Mpa (264 psi)（18.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
