Escor™ 6000 resin is primarily intended for extrusion coating and coextrusion coating. It is the high draw down version of Escor™ 5000 resin. It offers the following advantages: very low coating weight achievable at high line speed; very good adhesion to polar substrates, aluminum foil, metallized films, paper, iron, steel, and glass; and excellent balance of adhesion onto the substrates and interlayer adhesion with coextruded LDPE and EVA material.
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Processing | ExtrusionCo-extrusionExtrusion Coating | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D 1505 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Neck-in | *** cm | Internal | 100 m/min, Constant output at 35 rpm, 280°C |
Neck-in | *** cm | Internal | 25 m/min, Constant output at 35 rpm, 280°C |
Neck-in | *** cm | Internal | 50 m/min, Constant output at 35 rpm, 280°C |
Acrylic Acid | *** % | Internal | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | Peak |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
