A high melt strength homopolymer resin that provides uniform wall distribution in thin wall packaging applications and excellent processing characteristics in extrusion and thermoforming processes.
Achieve™ Advanced PP6282NE1 has a broad processing window and can be run at fast cycle times.
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Features | High Stiffness/RigidityEasy processingFast Cycle TimeHigh melt strengthHomopolymerNucleated | |||
| Appearance | Pellets/GranulesNatural Color | |||
| Processing | ExtrusionSheet ExtrusionThermoforming | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 51 mm/min |
Tensile Elongation | |||
Yield | *** % | ASTM D638 | 51 mm/min |
Flexural Modulus | *** Mpa | ASTM D790 | 1% Secant, 1.3 mm/min |
Flexural Modulus | *** Mpa | ASTM D790 | 1% Secant, 13 mm/min |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
23℃ (73℉) | *** J/m | ASTM D256 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ASTM D648 | Unannealed |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
