VERSIFY™ 3401 Elastomer is a resin with a medium melt flow rate suitable for a wide variety of applications and fabrication processes, including cast film, extrusion and injection molding. It is an excellent resin for stretch films and soft films, and is an excellent choice for PP modification, giving consistent performance in hot and cold conditions.
Main Characteristics
White pellet
Free flowing
Medium flow
Excellent elasticity
Excellent compatibility with PP
Applications
Stretch film
Overmolding
Soft film
PP modification
Complies with:
EU, No 10/2011
U.S. FDA
U.S. FDA FCN 909
Consult the regulations for complete details.
| Original Document | Technical Datasheet(English) | |||
| Appearance | Pellets/GranulesWhite | |||
| Processing | Cast FilmInjectionExtrusion | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
230°C/2.16 kg | *** g/10min | ASTM D 1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D638 | Compression Molded |
Tensile Elongation | |||
Break | *** % | ASTM D638 | Compression Molded |
Flexural Modulus | *** Mpa | ASTM D790 | 1% Secant, Compression Molded |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 10s, Compression Molded |
Shore D hardness | *** D | ASTM D 2240 | 10s, Compression Molded |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Melt Temperature(Tm) | *** °C | Internal | DSC |
Glass Transition Temperature | *** °C | Internal | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 2000 µm, Injection Molded |
Gloss | *** - | ASTM D 523 | 20°, 1000 µm, Compression Molded |
Gloss | *** - | ASTM D 523 | 60°, 1000 µm, Compression Molded |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
