65 Shore A hardness, 1 to 1 mix Liquid Silicone Rubber (LSR) designed for liquid injection molding
Features & Benefits
• Unique rheology • Improved flowability • Longer pot-life • Excellent process performance enables short cycle times • Food contact: Formulated to meet requirements of BfR XV recommendation and of FDA 21 CFR 177.2600 • Drinking water: KTW and WRAS approved
Applications
SILASTIC™ RBL-9200-65 Liquid Silicone Rubber is a translucent, general purpose LSR, formulated to give excellent process performance due to improved rheology and longer potlife.
This product can be used in a wide range of applications, including but not limited to: • General consumer goods articles • Food contact ( e.g. cooking ware, valves, diaphragms) • Water approved applications (e.g. shower heads) • Grommets, gaskets
| Original Document | Technical Datasheet(English) SILASTIC™ RBL-9200 Series LSR Product Guide(English) | |||
| Features | Food ContactDrinking Water Contact | |||
| Compliance | BfR (BgVV)FDAKTWWRAS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Viscosity | *** Pa-s | Internal | Part A |
Viscosity | *** Pa-s | Internal | Part B |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | |
Tensile Elongation | |||
- | *** % | ASTM D 412 | |
Tear Strength | *** kN/m | ASTM D 624 | |
Compression Set | *** % | ASTM D 395 | |
Rebound Resilience | *** % | ISO 4662 | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | |
Dielectric Constant(Permittivity) | |||
60 Hz | *** - | ASTM D 150 | |
Dissipation Factor | |||
60 Hz | *** E-4 | ASTM D 150 | |
Dielectric Strength | *** kV/mm | ASTM D149 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
