SILASTIC™ MS-2002 Moldable Silicone Reflector is a white reflective material which enables creativity and flexibility in designing and manufacturing of light reflectors. This is a high viscosity, high Shore A hardness, fast curing optical molding resin for producing fine detail with good resistance to environmental aging.
Features & Benefits
• High reflectance • Good mold flow, excellent feature reproduction • High temperature stability • UV aging resistance • High reflectance can increase light output from the device and improve energy efficiency • Minimal color change on heat or UV exposure giving prolonged performance and product life • Excellent mold detail or feature reproduction and ability to mold undercuts etc., gives flexibility in designs
Applications
• White reflector in lighting applications
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) UL Yellow Card(English) | |||
| Features | Light ReflectanceUV Stabiltiy | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | Internal | |
Viscosity | *** Pa-s | Internal | Part A |
Viscosity | *** Pa-s | Internal | Part B |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | Internal | |
Tensile Elongation | |||
- | *** % | Internal | |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | Internal | |
Shore D hardness | *** D | Internal | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Specific Heat | *** J/g-°C | - | |
Coefficient of Linear Thermal Expansion | |||
- | *** E-6/°C | TMA | |
Thermal Conductivity | *** W/(m K) | - | |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | Internal | |
Dielectric Constant(Permittivity) | |||
100Hz | *** - | ASTM D 150 | |
100 kHz | *** - | ASTM D 150 | |
1MHz | *** - | ASTM D 150 | |
Dissipation Factor | |||
100Hz | *** E-4 | ASTM D 150 | |
100 kHz | *** E-4 | ASTM D 150 | |
1MHz | *** E-4 | ASTM D150 | |
Dielectric Strength | *** kV/mm | Internal | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Reflectance | *** % | Internal | 450 nm |
Reflectance | *** % | Internal | 555 nm |
Reflectance | *** % | Internal | 630 nm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
