60 durometer, off-white, uncatalyzed fluorosilicone rubber base
Features & Benefits
• High tear strength
• No post-cure potential
• Good handing properties
• Easily pigmented
• Excellent solvent/fluid resistance
• Retains properties over a wide temperature range
Applications
• Molded, extruded and calendered goods
| Original Document | Technical Datasheet(English) | |||
| Appearance | White | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | As Molded |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | As Molded |
- | *** Mpa | ASTM D 412 | Post-Cured |
at 100% strain | *** Mpa | ASTM D 412 | As Molded |
at 100% strain | *** Mpa | ASTM D 412 | Post-Cured |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | As Molded |
Break | *** % | ASTM D 412 | Post-Cured |
Tear Strength | *** kN/m | ASTM D 624 | As Molded |
Tear Strength | *** kN/m | ASTM D 624 | Post-Cured |
Compression Set | *** % | ASTM D 395 | As Molded, 22h at 177°C |
Compression Set | *** % | ASTM D 395 | Post-Cured (Cont.), 22h at 177°C |
Rebound Resilience | *** % | ASTM D 2632 | As Molded |
Rebound Resilience | *** % | ASTM D 2632 | Post-Cured |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | As Molded |
Shore A hardness | *** A | ASTM D 2240 | Post-Cured |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Change in Volume | *** % | ASTM D471 | Fuel B, 23°C |
Change in Volume | *** % | ASTM D471 | Fuel C, 23°C |
Change in Volume | *** % | ASTM D471 | IRM 903, 150°C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
