70 Durometer, light straw, uncatalyzed fluorosilicone rubber
Features & Benefits
• High Resilience
• Low Compression Set
• No Post Cure Potential
• Easily Pigmentable
• Good Handling Properties
• Excellent Solvent/Fluid Resistance
• Retains Properties over a Wide Temperature Range
Applications
• Molded, extruded or calendered goods that require high modulus, high elasticity, and low compression set.
| Original Document | Technical Datasheet(English) Product Guide(English) Product Guide(Chinese) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | As Molded |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | As Molded |
- | *** Mpa | ASTM D 412 | Post-Cured |
at 100% strain | *** Mpa | ASTM D 412 | As Molded |
at 100% strain | *** Mpa | ASTM D 412 | Post-Cured |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | As Molded |
Break | *** % | ASTM D 412 | Post-Cured |
Tear Strength | *** kN/m | ASTM D 624 | As Molded |
Tear Strength | *** kN/m | ASTM D 624 | Post-Cured |
Compression Set | *** % | ASTM D 395 | As Molded, 22h at 177°C |
Compression Set | *** % | ASTM D 395 | Post-Cured (Cont.), 70h at 200°C |
Compression Set | *** % | ASTM D 395 | Post-Cured (Cont.), 22h at 177°C |
Rebound Resilience | *** % | ASTM D 2632 | As Molded |
Rebound Resilience | *** % | ASTM D 2632 | Post-Cured |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | As Molded |
Shore A hardness | *** A | ASTM D 2240 | Post-Cured |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Low Temp. Retraction | *** °C | ASTM D1329 | TR10 |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Change in Volume | *** % | ASTM D471 | Fuel B, 23°C for 24H |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
