40 durometer, off-white, uncatalyzed fluorosilicone rubber base
FEATURES & BENEFITS
Very low compression set
No post cure potential
High resiliency
Good tensile strength
Good handling properties
Easily pigmented
Excellent solvent/fluid resistance
Retains properties over a wide temperature range
APPLICATIONS
Molded, extruded and calendered goods
| Original Document | Technical Datasheet(English) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 412 | DIE C |
Tensile Elongation | |||
Break | *** % | ASTM D 412 | DIE C |
Tear Strength | *** kN/m | ASTM D 624 | |
Compression Set | *** % | ASTM D 395 | as-molded, 10 minutes at 171°C |
Compression Set | *** % | ASTM D 395 | method B, after 22 hours at 177°C |
Rebound Resilience | *** % | ASTM D 2632 | Bashore resiliency |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | 1 second |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Change in Volume | *** % | ASTM D471 | Fuel B, 24 hours at 23°C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
