40 Shore A hardness, 1 to 1 mix, 100% fluorosilicone rubber designed for liquid injection molding
Features & Benefits
• Excellent resistance against automotive fuels and oils
• Fast cure platinum technology, no cure by-products
• Cures over a wide temperature range: 130°C to 200°C
• High temperature resistance
Applications
• Solvent and chemically resistant membranes and gaskets
• Intricate parts with close tolerances
• Electrical/electronic connectors
• Extrusion onto wires, belts, fabrics, and other surfaces
| Original Document | Technical Datasheet(English) Technical Datasheet(Chinese) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | As Molded |
Viscosity | *** Pa-s | ASTM D4287 | Part A |
Viscosity | *** Pa-s | ASTM D4287 | Part B |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | DIN 53504 | As Molded |
Tensile Elongation | |||
Break | *** % | DIN 53504 | As Molded |
Tear Strength | *** kN/m | ASTM D 624 | As Molded |
Compression Set | *** % | ASTM D 395 | As Molded |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore A hardness | *** A | ASTM D 2240 | As Molded |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
