INFUSE™ 9100 Olefin Block Copolymer is a high performance olefin block copolymer that can be widely used in thermoplastic elastomer applications where higher service temperature requirements are needed. INFUSE 9100 exhibits very good processability in various extrusion processes. INFUSE 9100 also provides high filler loading capability along with low compression set over a wide temperature range.
Main Characteristics
High upper service temperature performance
Highly flexible with good elastic recovery
Fast set up times for processability
General purpose elastomer
Excellent for compounds and blends
Complies with
EU, No 10/2011
U.S. FDA FCN 424 Consult the regulations for complete details.
| 原厂资料 | 物性表-ASTM(英文) | |||
| 产品特性 | 良好柔韧性耐热弹性体 | |||
| 法规认证 | EU 2011/10/EC (欧盟食品级)FDA(食品药品监督管理局) | |||
| 物理性能 | 值/单位 | 测试标准 | 测试条件 |
|---|---|---|---|
密度 | 0.877 g/cm³ | ASTM D792 | |
熔体质量流动速率(MFR) | |||
190℃/2.16 kg | 1 g/10min | ASTM D1238 | |
| 机械性能 | 值/单位 | 测试标准 | 测试条件 |
拉伸强度 | |||
断裂(brk) | 6.6 Mpa | ASTM D638 | Compression Molded |
断裂(brk) | 13 Mpa | ASTM D 412 | |
拉伸延伸率 | |||
断裂(brk) | 480 % | ASTM D638 | Compression Molded |
断裂(brk) | 1300 % | ASTM D 412 | |
弯曲模量 | 19.1 Mpa | ASTM D790 | 2% Secant, Compression Molded |
拉伸模量 | 2.79 Mpa | ASTM D638 | 100% Secant, Compression Molded |
撕裂强度 | 40 kN/m | ASTM D 624 | |
压缩永久形变 | 19 % | ASTM D 395 | 21°C |
压缩永久形变 | 47 % | ASTM D 395 | 70°C |
| 硬度性能 | 值/单位 | 测试标准 | 测试条件 |
邵氏硬度 A | 75 A | ASTM D 2240 | Compression Molded |
| 热学性能 | 值/单位 | 测试标准 | 测试条件 |
熔融温度(Tm) | 120 °C | Internal | DSC |
热机械分析(TMA) | 114 °C | Internal | 1.00 mm, 1N, 5°C/min |
此物性表中的信息由阿技材料库从该材料的生产商处获得。阿技材料库尽最大努力确保此数据的准确性。 但是阿技材料库对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。
