FUSABOND™ N598 is an anhydride modified ethylene copolymer.
Uses
Polymer Modifier
Composition
Medium% By Weight Maleic Anhydride
Graft levels are defined as:
Low < 0.2%; Medium 0.2-0.5%; High 0.5-1.0%; Ultra high > 1.0%
Features
Good balance of toughness and mold flow in PA6 modification.
Applications
Impact modifier for polyamide blends with medium grafting level of maleic anhydride.
Provides impact resistance for high flow polyamide compounds.
Compatibilizer or adhesion promoter between polyolefins and metals, polyamide, cellulose, and glass fibers.
| Original Document | ||||
| Processing | Compounding | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ASTM D3418 | DSC |
Glass Transition Temperature | *** °C | Internal | |
Freezing temperature | *** °C | ASTM D 3418 | DSC |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
