登录 | 注册

联系阿技

邮箱:
lnfo@ajieng.com
QQ联系客服:
微信扫一扫联系客服

ENGAGE™ 8150

TPO(POE聚烯烃弹性体)

陶氏化学(Dow Chemical)

产品描述

ENGAGE™ 8150 Polyolefin Elastomer is an ethylene-octene copolymer that has excellent flow characteristics and provides superb impact properties in blends with polypropylene (PP) and polyethylene (PE) and is widely used in TPO applications where excellent low temperature impact properties are desired.

ENGAGE 8150 provides high filler loading capability and outstanding peroxide cure capability. When cross-linked by peroxide, silane, or irradiation, it gives exceptional heat aging, compression set, and weather resistance properties and may be used to produce high performance electrical insulation.

Main Characteristics:

  • Pellet form

  • Excellent flow characteristics

  • Improved impact in polypropylene and polyethylene

  • High filler loading

  • Peroxide, silane, and radiation curable

  • Exceptional heat aging, compression set, and weather resistance when cured


Applications:

  • General purpose thermoplastic elastomers

  • Impact modification

  • Thermoplastic olefins (TPO)

  • Wire and cable

    基本信息
    原厂资料
    物性表-ASTM(英文)
    颜色形状
    粒状
    成型方式
    线缆挤出
    共混改性
    技术参数
    物理性能 值/单位 测试标准 测试条件

    密度

    		 0.868 g/cm³ ASTM D792

    熔体质量流动速率(MFR)

    190℃/2.16 kg

    		0.5 g/10min ASTM D1238

    粘度

    		 33 MU ASTM D1646
    Mooney Viscosity (ML 1+4, 250°F (121°C))
    机械性能 值/单位 测试标准 测试条件

    拉伸强度

    断裂(brk)

    		9.5 Mpa ASTM D638
    510 mm/min, Compression Molded

    拉伸延伸率

    断裂(brk)

    		810 % ASTM D638
    510 mm/min, Compression Molded

    弯曲模量

    		 15.2 Mpa ASTM D790
    1% Secant : Compression Molded

    弯曲模量

    		 14.4 Mpa ASTM D790
    2% Secant : Compression Molded

    拉伸模量

    		 2.6 Mpa ASTM D638
    100% Secant, 510 mm/min, Compression Molded

    撕裂强度

    		 37.3 kN/m ASTM D 624
    Die C
    硬度性能 值/单位 测试标准 测试条件

    邵氏硬度 A

    		 70 A ASTM D 2240
    1 sec, Compression Molded

    邵氏硬度 D

    		 20 D ASTM D 2240
    1 sec, Compression Molded
    热学性能 值/单位 测试标准 测试条件

    维卡软化温度(Vicat)

    		 46 °C ASTM D1525

    熔融温度(Tm)

    		 55 °C Internal
    DSC, 10°C/min

    玻璃化温度(Tg)

    		 -52 °C Internal

    结晶温度

    		 42 °C Internal
    DSC

    此物性表中的信息由阿技材料库从该材料的生产商处获得。阿技材料库尽最大努力确保此数据的准确性。 但是阿技材料库对这些数据值不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。