ELITE™ AT 6401 Enhanced Polyethylene Resin is an ethylene/octene-1 copolymer suitable for the production of blown film requiring good sealing and toughness with good stiffness and temperature resistance.
Main Characteristics
High Hot Tack and Seal Strength
Broad Hot Tack and FFS Packaging Window
Excellent Stiffness and Toughness Properties
High Throughput Resin with Excellent Bubble Stability
Complies with:
U.S. FDA FCN 424
EU, No 10/2011
Canadian HPFB No Objection
Consult the regulations for complete details.
| Original Document | Technical Datasheet-ASTM(English) | |||
| Processing | Blown Film | |||
| Compliance | EU 2011/10/ECFDAHPFB (Canada) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | DSC |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 25.4 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Piercing strength | *** N | Internal | 25 µm |
Puncture resistance | *** J/cm³ | Internal | 25 µm |
Puncture resistance | *** J | Internal | 25 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 25 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, MD, 25 µm |
Dart Drop Impact | *** g | ASTM D 1709 | 25 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
