ELITE™ AT 6111 Enhanced Polyethylene Resin is an ethylene-octene copolymer based on ELITE™ AT technology from Dow. This resin is designed for cast stretch machine wrap films in pallet wrap application and offers an optimized balance of extensibility, impact strength, and puncture resistance.
Main Characteristics:
Excellent extensibility
High impact and exceptional puncture resistance
Excellent processibility with low back pressure and power consumption.
Complies with:
U.S. FDA FCN 424
EU, No 10/2011
Canadian HPFB No Objection
Consult the regulations for complete details.
| Original Document | Technical Datasheet-ASTM(English) | |||
| Processing | Cast Film | |||
| Compliance | EU 2011/10/ECFDAHPFB (Canada) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Density/Specific Gravity | *** g/cm³ | Internal | Base Density |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | DSC |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 20.3 µm |
Gloss | *** - | ASTM D 2457 | 45°, 20.3 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD, 20 µm |
Yield | *** Mpa | ASTM D 882 | TD, 20 µm |
Break | *** Mpa | ASTM D 882 | MD, 20 µm |
Break | *** Mpa | ASTM D 882 | TD, 20 µm |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 20 µm |
Break | *** % | ASTM D 882 | TD, 20 µm |
Piercing strength | *** N | Internal | 20 µm |
Puncture resistance | *** J/cm³ | Internal | 20 µm |
Puncture resistance | *** J | Internal | 20 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 20 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 20 µm |
Dart Drop Impact | *** g | ASTM D 1709 | 20 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
