ELITE™ 5401GS Enhanced Polyethylene Resin is a copolymer produced via INSITE™ Technology from Dow. It offers extremely high impact resistance, combined with excellent tear, tensile and optical properties for high strength blown film applications. ELITE 5401GS Enhanced Polyethylene Resin offers a unique combination of low seal initiation temperature and high modulus and low blocking tendency for automatic packaging applications. ELITE 5401GS Enhanced Polyethylene Resin contains slip and antiblock additives
Applications:
Food and specialty packaging films.
Very tough thin gauge films
Complies with:
EU, No 10/2011
U.S. FDA FCN 424
Consult the regulations for complete details.
| Original Document | Technical Datasheet(English) | |||
| Additive | Slip agentAntiblock | |||
| Processing | Blown Film | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Melt Temperature(Tm) | *** °C | DSC | |
Processing Temperature | ***~*** °C | - | Melting Temperature |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ISO 14782 | 51 µm |
Gloss | *** - | ASTM D 2457 | 45°, 51 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-3 | MD, 51 µm |
Yield | *** Mpa | ISO 527-3 | TD, 51 µm |
Break | *** Mpa | ISO 527-3 | MD, 51 µm |
Break | *** Mpa | ISO 527-3 | TD, 51 µm |
Tensile Elongation | |||
Break | *** % | ISO 527-3 | MD, 51 µm |
Break | *** % | ISO 527-3 | TD, 51 µm |
Tensile Modulus | *** Mpa | ISO 527-3 | 2% Secant, MD, 51 µm |
Tensile Modulus | *** Mpa | ISO 527-3 | 2% Secant, TD, 51 µm |
Piercing strength | *** N | ASTM D5748 | 51 µm |
Puncture resistance | *** J | ASTM D 5748 | 51 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 51 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 51 µm |
Dart Drop Impact | *** g | ISO 7765-1 | 51 µm |
Seal Initiation Temperature | *** ℃ | Internal | 51 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
