ELITE™ 5400GS Enhanced Polyethylene Resin is a copolymer produced via INSITE™ Technology from Dow. It offers extremely high impact resistance, combined with excellent tear, tensile and optical properties for high strength blown film applications. In addition, ELITE 5400GS Enhanced Polyethylene Resin offers a unique combination of low seal initiation, higher modulus, and low blocking tendencies for automated packaging applications.
Applications:
For food and specially packaging films.
Extremely high impact resistance.
Excellent tear, tensile, and optical properties.
Low seal initiation temperatures and high hot tack strengths for form-fill-seal applications.
Complies with:
EU, No 10/2011
U.S. FDA FCN 424
Consult the regulations for complete details.
| Original Document | Technical Datasheet-ASTM(English) Technical Datasheet-ASTM(Chinese) | |||
| Processing | Blown Film | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | Internal | DSC |
Processing Temperature | ***~*** °C | - | Melting Temperature |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 51 µm |
Gloss | *** - | ASTM D 2457 | 45°, 51 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD, 51 µm |
Yield | *** Mpa | ASTM D 882 | TD, 51 µm |
Break | *** Mpa | ASTM D 882 | MD, 51 µm |
Break | *** Mpa | ASTM D 882 | TD, 51 µm |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 51 µm |
Break | *** % | ASTM D 882 | TD, 51 µm |
Piercing strength | *** N | Internal | 51 µm |
Puncture resistance | *** J | Internal | 51 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 51 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 51 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 1% Secant, MD, 51 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 1% Secant, TD, 51 µm |
Dart Drop Impact | *** g | ASTM D 1709 | 51 µm |
Seal Initiation Temperature | *** ℃ | Internal | 51 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
