• Excellent extensibility
• High impact and puncture resistance
• Excellent on-pallet load elongation for higher yields on regular loads
Complies with:
• U.S. FDA FCN 424
• EU, No 10/2011
Consult the regulations for complete details.
| Original Document | Technical Datasheet-ASTM(English) | |||
| Processing | Cast Film | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Melt Temperature(Tm) | *** °C | Internal | DSC |
Processing Temperature | *** °C | - | Melt Temperature |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 20.3 µm |
Gloss | *** - | ASTM D 2457 | 45°, 20.3 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD, 20 µm |
Yield | *** Mpa | ASTM D 882 | TD, 20 µm |
Break | *** Mpa | ASTM D 882 | MD, 20 µm |
Break | *** Mpa | ASTM D 882 | TD, 20 µm |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 20 µm |
Break | *** % | ASTM D 882 | TD, 20 µm |
Piercing strength | *** N | Internal | 20 µm |
Piercing strength | *** N | Internal | 20 µm, 250% pre-stretch; |
Puncture resistance | *** J/cm³ | Internal | 20 µm |
Puncture resistance | *** J | Internal | 20 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 20 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 20 µm |
Dart Drop Impact | *** g | ASTM D 1709 | 20 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
