DOW™ LDPE 690 HEALTH+™ is a Low Density Polyethylene barefoot resin designed for extrusion blow molding, injection blow molding, and blow-fill seal applications with good flexibility, moderate rigidity and good chemical resistance. It is also suitable for medical packaging films.
Main Characteristics:
Good flexibility
Good chemical resistance
Good stiffness
Complies with:
U.S. FDA 21CFR 177.1520 (c) 2.2
USP Class VI
Drug Master File Listing
Canadian HPFB (No Objections)
EU, No 10/2011
Consult the regulations for complete details.
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | Good StiffnessGood FlexibilityMedical Application/Health CareChemical Resistance | |||
| Processing | Blown FilmInjection Blow MoldingExtrusion Blow Molding | |||
| Compliance | Drug Master FileEU 2011/10/ECFDAHPFB (Canada)USP Class VI | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Density/Specific Gravity | *** g/cm³ | Internal | Base Density |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Melt Temperature(Tm) | *** °C | Internal | DSC |
Processing Temperature | *** °C | - | Melt Temperature |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 50.8 µm |
Gloss | *** - | ASTM D 2457 | 45°, 50.8 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD, 51 µm |
Yield | *** Mpa | ASTM D 882 | TD, 51 µm |
Break | *** Mpa | ASTM D 882 | MD, 51 µm |
Break | *** Mpa | ASTM D 882 | TD, 51 µm |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 51 µm |
Break | *** % | ASTM D 882 | TD, 51 µm |
Puncture resistance | *** J/cm³ | Internal | 51 µm |
Film Toughness | *** J/cm³ | ASTM D882 | MD, 51 µm |
Film Toughness | *** J/cm³ | ASTM D882 | TD, 51 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 51 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 51 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, MD, 51 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, TD, 51 µm |
Dart Drop Impact | *** g | ASTM D 1709 | 51 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
