DOW LDPETM 582E Polyethylene Resin can be readily extruded using conventional blown film techniques utilising melt temperatures between 150 and 170°C. DOW LDPE 582E Polyethylene Resin, when properly fabricated, shows good mechanical properties and high optical properties. It shows very good drawdown properties and excellent processability. This product contains slip and antiblock additives.
Regulations:
DOW LDPE 582E Polyethylene Resin should comply with:
U.S. FDA 21 CFR 177.1520(c) 2.2
EU, No 10/2011
U.S. FDA-DMF
Consult the regulations for complete details.
Applications:
Light produce bags.
Soft goods packaging.
Textile packaging.
High clarity applications.
| Original Document | Technical Datasheet(English) | |||
| Additive | Slip agentAntiblock | |||
| Processing | Blown Film | |||
| Compliance | Drug Master FileEU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Friction | ***~*** - | ASTM 1894 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Processing Temperature | ***~*** °C | - | Melt Temperature |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 50 µm |
Gloss | *** - | ASTM D 2457 | 20°, 50 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD, 50 µm |
Yield | *** Mpa | ASTM D 882 | TD, 50 µm |
Break | *** Mpa | ASTM D 882 | MD, 50 µm |
Break | *** Mpa | ASTM D 882 | TD, 50 µm |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 50 µm |
Break | *** % | ASTM D 882 | TD, 50 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 50 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 50 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, MD, 50 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, TD, 50 µm |
Dart Drop Impact | *** g | ASTM D 1709 | 50 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
