DOW™ HDPE 35060A is a High Density Polyethylene resin produced in the Slurry Process. This resin presents good impact and environmental stress cracking resistance. Its high density allows reducing the weight of the container while maintaining good rigidity.
Main Characteristics:
Used in the production of jars for detergents, mineral oils, cleaning products, food, cosmetics
Containers
Toys
Parts for cars
Complies with:
U.S. FDA 21 177 1520 (c) 3.2a
EU, No 10/2011
Latin America MERCOSUR - Applications in Contact with Foods: This product complies with the MECOSUR Regulations: GMC 56/92; GMC 39/19 and GMC 02/12
Consult the regulations for complete details.
| Original Document | Technical Datasheet-ASTM(English) | |||
| Processing | Blow Molding | |||
| Compliance | EU 2011/10/ECFDAMERCOSUR | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
190℃/5 kg | *** g/10 min | ISO 1133 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 50°C, 100% Igepal, Compression Molded |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | 1.90 mm, Compression Molded |
Break | *** Mpa | ASTM D638 | 1.90 mm, Compression Molded |
Tensile Elongation | |||
Break | *** % | ASTM D638 | Compression Molded |
Flexural Modulus | *** Mpa | ASTM D790 | Compression Molded |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Izod Notched Impact Strengh | |||
- | *** J/m | ASTM D 256 | Compression Molded |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ASTM D 2240 | 1.90 mm, Compression Molded |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
