For toys and housewares. Offers good low temperature impact strength, gloss and excellent toughness. This product is a narrow molecular weight distribution co
| Original Document | Technical Datasheet(English) | |||
| Features | High Impact at Low TemperaturHigh Gloss | |||
| Processing | Injection | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 100% IGEPAL |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D638 | MD |
Yield | *** Mpa | ASTM D638 | TD |
Break | *** Mpa | ASTM D638 | MD |
Break | *** Mpa | ASTM D638 | TD |
Tensile Elongation | |||
Break | *** % | ASTM D638 | MD |
Break | *** % | ASTM D638 | TD |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Impact | *** kJ/m² | ASTM D 1822 | |
Brittleness Temperature | *** °C | Internal | |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant Modulus, MD |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant Modulus, TD |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
