DOWLEX™ NG 2038B is a Polyethylene Resin material. It is available in Latin America.
Typical application of DOWLEX™ NG 2038B: Food Contact Applications
| Original Document | Technical Datasheet(English) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Processing Temperature | *** °C | - | Extrusion |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 37.5 µm |
Gloss | *** - | ASTM D 2457 | 45°, 37.5 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD, 38 µm |
Yield | *** Mpa | ASTM D 882 | TD, 38 µm |
Break | *** Mpa | ASTM D 882 | MD, 38 µm |
Break | *** Mpa | ASTM D 882 | TD, 38 µm |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 38 µm |
Break | *** % | ASTM D 882 | TD, 38 µm |
Puncture resistance | *** J/cm³ | Internal | 38 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 38 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 38 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, MD, 38 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, TD, 38 µm |
Dart Drop Impact | *** g | ASTM D 1709 | 38 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
