DOWLEX™ 6001GC Polyethylene Resin is an ethylene, 1-octene copolymer, suitable for high performance blown film applications alone or in blends with LDPE. It offers superior seal performance at high extrusion output rates and an excellent balance of optical and mechanical properties.
Main Characteristics:
Optimum extruder output and stability, pure or in blends.
Combination of sealability with optical and mechanical properties
Applications:
Lamination Films for Food and Specialty Packaging
Frozen Food Packaging
Fresh Food Packaging
Complies with:
Europe Commission Regulation (EU) No 10/2011EU
U.S. FDA FCN 424
Consult the regulations for complete details
| Original Document | Technical Datasheet(English) DOWLEX™ 6001GC Sealant Resin Product Guide | |||
| Additive | Slip agentAntiblock | |||
| Processing | Blown Film | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Density/Specific Gravity | *** g/cm³ | Internal | Base Density |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 50 µm |
Gloss | *** - | ASTM D 2457 | 45°, 50 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-3 | MD, 50 µm |
Yield | *** Mpa | ISO 527-3 | TD, 50 µm |
Break | *** Mpa | ISO 527-3 | MD, 50 µm |
Break | *** Mpa | ISO 527-3 | TD, 50 µm |
Tensile Elongation | |||
Break | *** % | ISO 527-3 | MD, 50 µm |
Break | *** % | ISO 527-3 | TD, 50 µm |
Tensile Modulus | *** Mpa | ISO 527-3 | 2% Secant, MD, 50 µm |
Tensile Modulus | *** Mpa | ISO 527-3 | 2% Secant, TD, 50 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 50 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 50 µm |
Dart Drop Impact | *** g | ISO 7765-1 | 50 µm |
Seal Initiation Temperature | *** ℃ | Internal | 50 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
