APTIV® 1300 film is the black version of unfilled semi-crystalline films made from VICTREX® PEEK polymer. The film provides a material solution for engineers in ultra-high performance applications offering an alternative option to the APTIV 1000 natural product.
APTIV 1300 film has a unique combination of properties providing high temperature performance, lightweight, mechanical strength, durability, excellent radiation, hydrolysis and chemical resistance, electrical insulation, wear and abrasion resistance, excellent barrier properties with high purity, good flammability without the use of flame retardants, low toxicity of combustion products and low moisture absorption in a film format. Inherently halogen-free and providing ease of processing makes APTIV films a technology enabler for OEMs, our customers and end users.
Availability
The films are available in a limited range of thicknesses from 50 microns up to 100 microns, though others may be added to the range.
| Original Document | Technical Datasheet(English) | |||
| Features | DurabilityHeat ResistanceFlame RetardantHalogen FreeInsulatingWear/Abrasion ResistanceLow Friction/WearEasy processingNon(Low)ToxicFood ContactChemical ResistanceHydrolysis ResistanceLow Moisture AbsorptionHigh Barrier property/Low permeation | |||
| Appearance | FilmBlack | |||
| Compliance | EU 2011/10/ECFDARoHS | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | 1300-050G |
Mold Shrinkage | |||
Flow | *** % | Internal | 1300-050G |
Across Flow | *** % | Internal | 1300-050G |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | 23ºC, 100V |
Dielectric Strength | *** kV/mm | ASTM D149 | 6.35mm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ISO 527-3 | MD,1300-050G |
Break | *** Mpa | ISO 527-3 | MD,1300-100G |
Break | *** Mpa | ISO 527-3 | TD,1300-050G |
Break | *** Mpa | ISO 527-3 | TD,1300-100G |
Tensile Elongation | |||
Break | *** % | ISO 527-3 | MD,1300-050G |
Break | *** % | ISO 527-3 | MD,1300-050G |
Break | *** % | ISO 527-3 | MD,1300-100G |
Break | *** % | ISO 527-3 | TD,1300-050G |
Break | *** % | ISO 527-3 | TD,1300-050G |
Break | *** % | ISO 527-3 | TD,1300-100G |
Tensile Modulus | *** Mpa | ISO 527-3 | MD,1300-050G |
Tensile Modulus | *** Mpa | ISO 527-3 | MD,1300-050G |
Tensile Modulus | *** Mpa | ISO 527-3 | MD,1300-100G |
Tensile Modulus | *** Mpa | ISO 527-3 | TD,1300-050G |
Tensile Modulus | *** Mpa | ISO 527-3 | TD,1300-050G |
Tensile Modulus | *** Mpa | ISO 527-3 | TD,1300-100G |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
