High performance thermoplastic material, PolyArylEtherKetone (PAEK), semi crystalline, filament for Additive Manufacture by filament fusion and other melt extrusion 3D printing processes. Colour natural/beige.
Typical Application Areas
Additive manufacturing processing. Filament Fusion printed parts, to achieve improved printed part strength and printability compared to PEEK polymer on most machines. For use in higher temperature applications and chemically aggressive environments. Low outgassing, suitable for sterilisation. Not suitable for medical implant applications. Product supplied vacuum packed with desiccant and dry when produced. Drying before use is recommended.
| Original Document | Technical Datasheet-ISO(English) | |||
| Features | Heat ResistanceLow EmissionChemical Resistance | |||
| Appearance | Filament | |||
| Processing | Fused Filament Fabrication (FFF)3D Printing | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Viscosity | *** Pa-s | ISO 11443 | Melt Viscosity, 400°C, 100s-1 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Modulus | *** Mpa | ISO 527 | XY |
Tensile Modulus | *** Mpa | ISO 527 | YZ |
Tensile Modulus | *** Mpa | ISO 527 | ZX |
Tensile Strength | |||
Yield | *** Mpa | ISO 527 | XY |
Yield | *** Mpa | ISO 527 | YZ |
Yield | *** Mpa | ISO 527 | ZX |
Tensile Elongation | |||
Break | *** % | ISO 527 | XY |
Break | *** % | ISO 527 | YZ |
Break | *** % | ISO 527 | ZX |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Melt Temperature(Tm) | *** °C | ISO 11357 | DSC |
Glass Transition Temperature | *** °C | ISO 11357 | DSC (Midpoint) |
Glass Transition Temperature | *** °C | ISO 11357 | DSC (Onset) |
Freezing temperature | *** °C | ISO 11357 | DSC |
Processing Temperature | ***~*** °C | - | Extrusion |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
