DOWLEX™ 2645 Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films (though it is not recommended for silage stretch film). Films made from this resin exhibit a combination of excellent toughness and tear resistance. The product also delievers very good processability on conventional LLDPE machinery.
Applications:
Various industrial and consumer film applications
Complies with:
EU, No 10/2011
U.S. FDA FCN 741
Consult the regulations for complete details
| Original Document | Technical Datasheet(English) | |||
| Processing | Blown Film | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Processing Temperature | ***~*** °C | - | Extrusion |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 50 µm |
Gloss | *** - | ASTM D 2457 | 45°, 50 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD, 50 µm |
Yield | *** Mpa | ASTM D 882 | TD, 50 µm |
Break | *** Mpa | ASTM D 882 | MD, 50 µm |
Break | *** Mpa | ASTM D 882 | TD, 50 µm |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 50 µm |
Break | *** % | ASTM D 882 | TD, 50 µm |
Piercing strength | *** N | ASTM D5748 | 50 µm |
Puncture resistance | *** J | ASTM D 5748 | 50 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 50 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 50 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, MD, 50 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, TD, 50 µm |
Dart Drop Impact | *** g | ASTM D 1709 | 50 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
