DOWLEX 2645.01G™ Polyethylene Resin is designed for the production of a wide variety of industrial and consumer films (though it is not reccomended for silage stretch film). Films made from this resin exhibit a combination of excellent toughness and tear resistance. The product also delivers very good processability on conventional LLDPE machinery. DOWLEX 2645.01G Polyethylene Resin contains slip and antiblock additives.
Applications:
Various industrial and consumer film
Complies with:
U.S. FDA 21 CFR 177.1520(c)3.2a.
EU, No 10/2011
Consult the regulations for complete details.
| Original Document | Technical Datasheet(English) | |||
| Additive | Slip agentAntiblock | |||
| Processing | Blown Film | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Processing Temperature | ***~*** °C | - | Extrusion |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 50 µm |
Gloss | *** - | ASTM D 2457 | 45°, 50 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-3 | MD, 50 µm |
Yield | *** Mpa | ISO 527-3 | TD, 50 µm |
Break | *** Mpa | ISO 527-3 | MD, 50 µm |
Break | *** Mpa | ISO 527-3 | TD, 50 µm |
Tensile Elongation | |||
Break | *** % | ISO 527-3 | MMD, 50 µm |
Break | *** % | ISO 527-3 | TD, 50 µm |
Tensile Modulus | *** Mpa | ISO 527-3 | 2% Secant, MD, 50 µm |
Tensile Modulus | *** Mpa | ISO 527-3 | 2% Secant, TD, 50 µm |
Piercing strength | *** N | ASTM D5748 | 50 µm |
Puncture resistance | *** J | ASTM D 5748 | 50 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 50 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 50 µm |
Dart Drop Impact | *** g | ISO 7765-1 | 50 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
