DOWLEX™ 2631UE Polyethylene Resin for rotational and injection moulding is specifically designed for applications requiring excellent processability and aesthetics combined with low warpage and good mechanical properties. Processing and Stabilisation: DOWLEX 2631UE™ Polyethylene Resin is fully heat and UV stabilised resulting in a wide processing latitude, good colour retention and long life expectancy. The powder version is named DOWLEX™ 2631.10UE Polyethylene Resin.
Applications:
Toys
Technical mouldings
Flat surface containers
Caravan tanks
Complies with:
EU, No 10/2011
U.S. FDA 21 CFR 177.1520(c)3.1a
Consult the regulations for complete details.
| Original Document | Technical Datasheet(English) | |||
| Features | Heat StabilizedLow WarpageEasy processingUV Stabiltiy | |||
| Appearance | Powder | |||
| Processing | InjectionRotational Molding | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 50°C, 100% Antarox, Compression Molded |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 527-2 | Compression Molded |
Tensile Elongation | |||
Break | *** % | ISO 527-2 | Compression Molded |
Flexural Modulus | *** Mpa | ISO 178 | Compression Molded |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Multiaxial Impact | ***~*** J | ISO 6603 | Rotational Molded |
Multiaxial Impact | ***~*** J | ISO 6603 | Rotational Molded |
| Hardness | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Shore D hardness | *** D | ISO 868 | Compression Molded |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Heat Deflection Temperature(HDT) | |||
0.45 Mpa (66 psi)（4.6kg/cm²） | *** °C | ISO 75-2/B | Unannealed |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | Rate B (120°C/h), Loading 1 (10 N) |
Melt Temperature(Tm) | *** °C | Internal | DSC |
Freezing temperature | *** °C | Internal | DSC |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
