DOWLEX™ 2107B Polyethylene Resin with Extra Stretch Performance is an Ethylene-1-Octene copolymer designed for cast film applications, such as industrial pallet wrap. DOWLEX 2107B provides stretch film with superior extensibility and increased resistance to failure around film flaws while maintaining exceptional puncture resistance and load retention.
Main Characteristics:
Industrial stretch film
Film for products for adult incontinence
Film for products for femine hygiene
Complies with:
U.S. FDA 21 CFR 177.1520 (c) 3.2a
EU, No 10/2011
Consult the regulations for complete details.
Suitable for food contact, Report # 927/09 issued by INAL according to MERCOSUR.
| Original Document | Technical Datasheet(English) | |||
| Processing | Cast Film | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 22 µm |
Gloss | *** - | ASTM D 2457 | 45°, 22 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD, 22 µm |
Yield | *** Mpa | ASTM D 882 | TD, 22 µm |
Break | *** Mpa | ASTM D 882 | MD, 22 µm |
Break | *** Mpa | ASTM D 882 | TD, 22 µm |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 22 µm |
Break | *** % | ASTM D 882 | TD, 22 µm |
Puncture resistance | *** J/cm³ | Internal | 22 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 22 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 22 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, MD, 22 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, TD, 22 µm |
Dart Drop Impact | *** g | ASTM D 1709 | 22 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
