Linear Low Density Polyethylene
For heavy duty film applications
Complies with U.S. FDA 21 CFR 177.1520 (c) 3.2a.
Canadian HPFB No Objection (With Limitations)
EU, No 10/2011
Consult the regulations for complete details.
| Original Document | Technical Datasheet(English) | |||
| Processing | Blown Film | |||
| Compliance | EU 2011/10/ECFDAHPFB (Canada) | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Density/Specific Gravity | *** g/cm³ | Internal | Base Density |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
Melt Temperature(Tm) | *** °C | Internal | DSC |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Haze | *** % | ASTM D1003 | 20.3 µm |
Haze | *** % | ASTM D1003 | 50.8 µm |
Gloss | *** - | ASTM D 2457 | 45°, 20.3 µm |
Gloss | *** - | ASTM D 2457 | 45°, 50.8 µm |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ASTM D 882 | MD, 20 µm |
Yield | *** Mpa | ASTM D 882 | MD, 51µm |
Yield | *** Mpa | ASTM D 882 | TD, 20 µm |
Yield | *** Mpa | ASTM D 882 | TD, 51 µm |
Break | *** Mpa | ASTM D 882 | MD, 20 µm |
Break | *** Mpa | ASTM D 882 | MD, 51µm |
Break | *** Mpa | ASTM D 882 | TD, 20 µm |
Break | *** Mpa | ASTM D 882 | TD, 51 µm |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 20 µm |
Break | *** % | ASTM D 882 | MD, 51µm |
Break | *** % | ASTM D 882 | TD, 20 µm |
Break | *** % | ASTM D 882 | TD, 51 µm |
Puncture resistance | *** J/cm³ | Internal | 20 µm |
Puncture resistance | *** J/cm³ | Internal | 51 µm |
Film Toughness | *** J/cm³ | ASTM D882 | MD, 20 µm |
Film Toughness | *** J/cm³ | ASTM D882 | MD, 51µm |
Film Toughness | *** J/cm³ | ASTM D882 | TD, 20 µm |
Film Toughness | *** J/cm³ | ASTM D882 | TD, 51 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 20 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 51µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 20 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 51 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, MD, 20 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, MD, 51 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, TD, 20 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, TD, 51 µm |
Dart Drop Impact | *** g | ASTM D 1709 | 20 µm |
Dart Drop Impact | *** g | ASTM D 1709 | 51 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
