Dowlex™ 2006G Polyethylene Resin is an ethylene 1-octene copolymer, suitable for cast film applications and also perfectly designed to give excellent filler acceptance and low torque during compounding.
Dowlex™ 2006G offers superior stiffness and excellent temperature resistance making it the perfect partner for down gauging. Films produced using Dowlex™ 2006G offer low shrinkage which is ideal when registered printing is used.
Main Characteristics:
Optimum extruder output and process ability, pure or in blends
Superior stiffness and temperature resistance
Complies with:
Europe Commission Regulation (EU) No 10/2011
U.S. FDA 21 CFR 177.1520(c )3.2a
Consult the regulations for complete details.
| Original Document | Technical Datasheet-ASTM(English) | |||
| Processing | Cast FilmCompounding | |||
| Compliance | EU 2011/10/ECFDA | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Density/Specific Gravity | *** g/cm³ | Internal | Base Density |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D 882 | MD, 20 µm |
Break | *** Mpa | ASTM D 882 | TD, 20 µm |
- | *** Mpa | ASTM D882 | MD, 20 µm |
- | *** Mpa | ASTM D882 | TD, 20 µm |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 20 µm |
Break | *** % | ASTM D 882 | TD, 20 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 20 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 20 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
