CONTINUUM™ DGDA-2490 BK GL Bimodal Polyethylene Resin is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long-term hydrostatic strength combined with outstanding resistance to slow crack growth and rapid crack propagation is desired. Suitable applications include natural gas distribution pipes, industrial piping, mining, sewage, and municipal water service lines.
Industrial Standards Compliance:
ISO Standard
MRS 10 / 20°C, PE100 listed by Exova
CRS 10 (20°C, 100 yr); CRS 8 (40°C, 90 yr); CRS 6.3 (60°C, 11 yr); CRS 11.2 (14°C, 50 yr)
| Original Document | Technical Datasheet(English) | |||
| Additive | Processing Aid | |||
| Appearance | Black | |||
| Processing | Tube Extrusion | |||
| Reinforced | 2.3% Carbon black | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Black |
Density/Specific Gravity | *** g/cm³ | ISO 1183 | Natural |
Density/Specific Gravity | *** g/cm³ | Internal | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ISO 1133 | |
190℃/5 kg | *** g/10 min | ISO 1133 | |
190℃/21.6 kg | *** g/10 min | ISO 1133 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Yield | *** Mpa | ISO 6259 | |
Tensile Elongation | |||
Break | *** % | ISO 6259 | |
Notch Pipe Test | *** hr | ISO 13479 | Notched Pipe Test ,80°C |
Notch Pipe Test | *** hr | ISO 16241 | PENT, 80°C |
Resistance to rapid crack propagation | *** bar | ISO 13477 | S-4 : 0°C |
Resistance to rapid crack propagation | *** °C | ISO 13477 | S-4 @10 bar |
| Additional Information | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Oxidative Induction Time | *** Min | ISO 11357 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
