AXELERON™ FO 6548 BK CPD is a prime quality, medium-density polyethylene compound ("CPD") designed for cable jacket use. It provides good processing characteristics combined with toughness, and stress crack and deformation resistance.
Specifications
AXELERON™ FO 6548 BK CPD meets the following raw material specifications:
ASTM D 1248 Type II, Class C, Category 4, Grades E6, E7, E8, E9, J4, J5
Federal LP-390C Type III, Class M, Grades 2, 3, Category 4
REA PE 39 and 89 (RAW MATERIAL SECTIONS)
| Original Document | Technical Datasheet-ASTM(English) | |||
| Appearance | Black | |||
| Processing | Wire & Cable Extrusion | |||
| Reinforced | 2.6% Carbon black | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 10% Igepal, F0 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Absorption Coefficient | *** - | ASTM D3349 | kAB/m |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
