AXELERON™ FO 6318 BK CPD is a high-density polyethylene jacket compound ("CPD") produced from resin made by the UNIPOL™ PE process. This compound provides easy processability, low shrinkage characteristics and a good balance of toughness, stress-cracking resistance, abrasion resistance, termite resistance and weather resistance. AXELERON™ FO 6318 BK CPD is suited for use as jacketing for fiber optic cables.
Specifications
AXELERON™ FO 6318 BK CPD meets the following raw material specifications:
ASTM D 1248 Type III, Class C, Category 4, Grades E8, E9
Wire and cables covered with AXELERON™ FO 6318 BK CPD, using sound commercial extrusion practice, should meet the following specifications:
ICEA: S-61-402
ANSI: C8.35
REA PE 39 and PE 89
IEC 60502
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | Wear/Abrasion ResistanceLow ShrinkageEasy processingWeather Resistance | |||
| Appearance | Black | |||
| Processing | Wire & Cable Extrusion | |||
| Reinforced | 2.6% Carbon black | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 10% Igepal, F0 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
Flexural Modulus | *** Mpa | ASTM D790 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Coefficient of Linear Thermal Expansion | |||
Flow | *** E-6 cm/cm/℃ | Internal | 23°C |
Processing Temperature | ***~*** °C | - | Extrusion |
Thermal Stress Crack Resistance | *** Hours | ASTM D2951 | F0 |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | ASTM D1531 | |
Dissipation Factor | |||
1MHz | *** E-4 | ASTM D1531 | |
| Optical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Absorption Coefficient | *** - | ASTM D3349 | kAB/m |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
