AXELERON™ CX 6944 NT CPD is a high density polyethylene compound ("CPD") designed for gas-injected foam insulation for CATV cable. This high density polyethylene compound has excellent electrical properties and toughness, as well as the needed stabilization for these applications. AXELERON™ CX 6944 NT CPD is commonly used in combination with AXELERON™ CX 1253 NT CPD LDPE. To obtain optimal cellular structure, an additional 0.1% to 0.3% of a suitable nucleating agent is recommended such as those in AXELERON™ CX A-0012 NT CPD
and AXELERON™ CX 0078 NT CPD masterbatches.
Specifications
Dow AXELERON™ CX 6944 NT CPD meets the following raw material specification:
ASTM D 1248 Type IV, Class A, Category 3
Wire insulated with Dow AXELERON™ CX 6944 NT CPD, using sound commercial extrusion practices, should meet the requirements of:
Telecordia GR-1398-CORE
Telecordia GR-1399-CORE
| Original Document | Technical Datasheet-ASTM(English) | |||
| Processing | Wire & Cable Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Processing Temperature | ***~*** °C | - | Extrusion |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | ASTM D1531 | |
Dissipation Factor | |||
1MHz | *** E-4 | ASTM D1531 |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
