AXELERON™ CS K-3364 NT CPD is a high-molecular weight, high-density polyethylene insulation compound ("CPD") specifically formulated to provide excellent oxidative stability, toughness, and abrasion resistance. It provides superior long term aging performance, while providing excellent environmental and thermal stress-cracking resistance. In addition, AXELERON™ CS K-3364 NT CPD provides excellent processability for high-speed wire insulating extrusion processes.
AXELERON™ CS K-3364 NT CPD provides good performance for telephone insulation applications, primarily cable designs for aerial environments. AXELERON™ CS K-3364 NT CPD is optimized to meet major international age testing standards and specifications for both solid and foam/skin insulation use.
Specifications
AXELERON™ CS K-3364 NT CPD meets the following raw material specifications:
ASTM D 1248 Type III Category A-4, Grade E8 and E9
Federal LP-390 C, II-H, Grades 1 and 2, Category 4
ISO 1872-PE, KHKN,45-D006
Telephone wire insulated with AXELERON™ CS K-3364 NT CPD, using sound commercial extrusion practices, should meet the following cable specifications:
ICEA S-84-608
EN-50290-2-23
IEC 60708
DIN VDE 0819-103
BS 6234 type H03
NF C 32-060
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | Wear/Abrasion ResistanceEasy processingOxidation stabilityESCR | |||
| Processing | Wire & Cable Extrusion | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
Environmental Stress Cracking Resistance | *** Hours | ASTM D 1693 | 100°C, 100% Igepal, F0 |
| Mechanical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
- | *** Mpa | ASTM D 638 | |
Tensile Elongation | |||
Break | *** % | ASTM D638 | |
| Impact | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Brittleness Temperature | *** °C | ASTM D 746 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Processing Temperature | ***~*** °C | - | Extrusion |
Thermal Stress Crack Resistance | *** Hours | ASTM D2951 | F0 |
| Electrical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Volume Resistivity | *** Ohm-cm | ASTM D257 | 23°C |
Dielectric Constant(Permittivity) | |||
1MHz | *** - | ASTM D1531 | |
Dissipation Factor | |||
1MHz | *** E-4 | ASTM D1531 | |
| Aging | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength(Heat Aging) | *** % | ASTM D638 | Retention, 48 hrs, 100°C |
Elonggation(Heat Aging) | *** % | ASTM D638 | Retention, 48 hrs, 100°C |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
