AGILITY™ 2000 Performance LDPE is a low density polyethylene resin with a fractional melt index especially designed for shrink films and industrial and consumer blown films. This resin provides high stiffness and tear resistance with exceptional bubble stability, high levels of shrink, very good toughness and optical properties.
Main Characteristics:
High output rates
Very high stiffness combined with good toughness - for potential downgauging
Very high tear resistance
High puncture resistance
Very high shrink
| Original Document | Technical Datasheet-ASTM(English) | |||
| Features | High Stiffness/RigidityGood ToughnessFast Cycle Time | |||
| Processing | Blown Film | |||
| Physical | Value/Unit(Sign in to View) | Test Standard | Test Condition |
|---|---|---|---|
Density/Specific Gravity | *** g/cm³ | ASTM D792 | |
Melt Mass Flow Rate(MFR) | |||
190℃/2.16 kg | *** g/10min | ASTM D1238 | |
| Thermal | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Vicat Softening Temperature(VST) | *** °C | ASTM D1525 | |
| Film | Value/Unit(Sign in to View) | Test Standard | Test Condition |
Tensile Strength | |||
Break | *** Mpa | ASTM D 882 | MD, 51 µm |
Break | *** Mpa | ASTM D 882 | TD, 51 µm |
Tensile Elongation | |||
Break | *** % | ASTM D 882 | MD, 51 µm |
Break | *** % | ASTM D 882 | TD, 51 µm |
Elmondorf Tear | *** g | ASTM D 1922 | MD, 51 µm |
Elmondorf Tear | *** g | ASTM D 1922 | TD, 51 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, MD, 51 µm |
Secant Modulus | *** Mpa | ASTM D 882 | 2% Secant, TD, 51 µm |
Dart Drop Impact | *** g | ASTM D 1709 | 51 µm |
The information presented on this datasheet was acquired by AjiEng.com from the producer of the material. AjiEng.com makes substantial efforts to assure the accuracy of this data. However, AjiEng.com assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.
